ioLogik E1241

Sku: 93588

Remote Ethernet I/O with 4AO, and 2-port Switch

Brand: MOXA

Datasheet scarica i dettagli tecnici
Prezzo di listino € 346,00

I prezzi di listino esposti sono espressi in Euro IVA esclusa.
Se siete un utilizzatore industriale-professionale ed avete un fabbisogno di tipo: ripetitivo, apprezzabile oppure legato ad un progetto particolare, Vi preghiamo di contattarci ai recapiti indicati per ottenere un supporto tecnico-commerciale mirato.
Non si vende: per importi sotto i 500 €, ad utenti finali ed a privati.

The prices shown are in Euro excluding VAT.
If you are an industrial or a professional user and you have the following kind of requirements as:
repetitive purchases, good quantities or a particular project to manage, then please contact us at our company contact details, in order to let you receive a tailored support.
We do not sell for amounts under 500 €, to end users and private citizens.

Features and Benefits

- Support Modbus/TCP Protocol
- Active communication with patented Active OPC Server
- 2-port Ethernet switch for daisy-chain topologies
- Easy mass deployment and configuration with ioSearch utility
- Save time and wiring cost with peer-to-peer communication
- User-defined Modbus/TCP addressing
- Simplify I/O managment with MXIO library on either Windows or Linux platform
- Supports SNMPv1/v2c
- UL/cUL Class I Division 2, ATEX Zone 2 certification
- Wide operating temperature: -40 to 75°C ( -40 to 167°F )

Introduction

A new daisy-chained Ethernet I/O concept is now available. The ioLogik E1241 industrial Ethernet remote I/O has two embedded Ethernet switch ports that allow information to flow to another local Ethernet device or connect to the next ioLogik in the daisy-chain. Applications such as factory automation, security and surveillance systems, and tunnel monitoring, can make use of daisy-chained Ethernet for building multi-drop I/O networks over standard Ethernet cables. Many industrial automation users are familiar with the multi-drop configuration typically used in fieldbus applications. The daisy-chain function on the Ethernet remote I/O ioLogik E1241 not only increases the connection between machines and panels, but also lowers the cost of buying separate Ethernet switches, and at the same time reduces labor fees and cabling by a large percentage. For example, if a production facility contains 700 stations (20 points per station), the wiring cost reduction can reach 15% of the total implementation cost. In remote automation applications, the control room and sensors are often far removed, making wiring over long distances a constant challenge. With peer-to-peer networking, users may now map a pair of ioLogik E1200 series modules so that input values will be directly transferred to output channels, greatly simplifying the wiring process and reducing wiring costs. For Modbus devices that are controlled and detected by fixed addresses, users need to spend a vast amount of time researching and verifying the configurations. Users need to locate each device’s networking details like I/O channels, or vendor-defined addresses to enable the initial or start address of a SCADA system or PLC. The ioLogik E1200, with user-definable Modbus/TCP addressing, offers greater flexibility, and setup is easy. Instead of worrying about individual devices, users simply configure the function and address map to fit their needs.

Inputs and Outputs

Analog Outputs: 4 channels
Isolation: 3k VDC or 2k Vrms

Analog Output

Resolution: 12 bits
Output Range: 0 to 10 VDC, 4 to 20 mA
Voltage Output: 10 mA (max.)

Accuracy:
     ±0.1% FSR @ 25°C
     ±0.3% FSR @ -40 and 75°C

Load Resistor: Internal register, 400 ohms
Note: 24 V of external power required when loading exceeds 1000 ohms.

Power Requirements

Power Consumption: 194 mA @ 24 VDC

MTBF (mean time between failures)

Time: 888,656 hrs
Database: Telcordia (Bellcore)

LAN

Ethernet: 2 switched 10/100 Mbps RJ45 ports
Protection: 1.5 kV magnetic isolation
Protocols: Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, HTTP

Power Requirements

Power Input: 24 VDC nominal, 12 to 36 VDC

Physical Characteristics

Wiring: I/O cable max. 14 AWG
Dimensions: 27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
Weight: Under 200 g
Mounting: DIN rail or wall

Environmental Limits

Operating Temperature:
     Standard Models: -10 to 60°C (14 to 140°F)
     Wide Temp. Models: -40 to 75°C (-40 to 167°F)
     Storage Temperature: -40 to 85°C (-40 to 185°F)

Ambient Relative Humidity: 5 to 95% (non-condensing)
Altitude: Up to 2000 m

Standards and Certifications

Safety: UL 508
EMI: EN 55022; EN 61000-3-2; EN 61000-3-3;
FCC Part 15, Subpart B, Class A

EMS:
     EN 55024, EN 61000-4-2, EN 61000-4-3,
     EN 61000-4-4, EN 61000-4-5, EN 61000-4-6,
     EN 61000-4-8, EN 61000-4-11

Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Green Product: RoHS, CRoHS, WEEE
Hazardous Location: UL/cUL Class I Diision 2, ATEX Zone 2

Warranty

Warranty Period: 5 years (excluding ioLogik E1214)
Note: Because of the limited lifetime of power relays, products that use this component are covered by a 2-year warranty.